Skip to main content

Heisler locomotive

Heisler locomotive

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search
A Heisler locomotive
Heisler technical view

The Heisler locomotive was the last variant of the three major types of geared steam locomotives.

Charles L. Heisler received a patent for the design in 1892, following the construction of a prototype in 1891.[1] Somewhat similar to a Climax locomotive, Heisler's design featured two cylinders canted inwards at a 45-degree angle to form a 'V-twin' arrangement. Power then went to a longitudinal drive shaft in the center of the frame that drove the outboard axle on each powered truck through bevel gears in an enclosed gearcase riding on the axle between the truck frames. The inboard axle on each truck was then driven from the outboard one by external side (connecting) rods.

In 1897, Heisler received a patent on a three-truck locomotive.[2] As with Class C Shay locomotives, the tender rode on the third truck. Unlike the Shay, Heisler's design did not have a continuous string of line shafting running the length of the engine. Instead, the tender truck was driven by a line shaft above the shaft driving the main engine trucks, connected to it through spur gears. This patent also covered use of a 4-cylinder 'vee four' cylinder configuration.

The Heisler was the fastest of the geared steam locomotive designs, and yet was still claimed by its manufacturer to have the same low-speed hauling ability[citation needed].

Builders[edit]

The first Heislers were built by the Dunkirk Engineering Company of Dunkirk, New York, at the time producer of their own design of geared locomotive (called the Dunkirk), of which the Heisler could be considered an improvement. They did not adopt the Heisler design, but in 1894 the Stearns Manufacturing Company of Erie, Pennsylvania started to produce Heislers, and did so until 1904. Reorganised as the Heisler Locomotive Works in 1907, it produced locomotives of the Heisler design until 1941.

A & G Price of Thames, New Zealand received an order for a Heisler locomotive in 1943 from Ogilvie and Co, sawmillers of Hokitika, who wanted to purchase a Heisler locomotive but were unable to do so as production of Heisler locomotives had ceased in 1941. The resulting locomotive, maker's NO 148 of 1944, was the last Heisler-design steam locomotive to be built, and closely followed Heisler practice but with the addition of a Belpaire firebox and front-mounted water tanks that featured a unique curved leading edge.

Variants[edit]

Heislers were produced mostly in two- and three-truck variants in sizes ranging from 17 to 95 short tons (15.2 to 84.8 long tons; 15.4 to 86.2 t). There was one single-truck, narrow gauge Heisler built, Lake Shore Stone Products Co. #7 for the Lake Shore Stone Products Co..Lake Shore Stone Co., Milwaukee, Wisconsin?

Notable survivors[edit]

Roughly 625 Heislers were produced, of which some 35 still exist. Approximately eight of these survivors are currently operational.

Works No. Year Type Weight Preserved as Location Notes
1375 1918 2-truck 53 short tons
(47.3 long tons; 48.1 metric tons)
Chicago Mill and Lumber Company 4 Railroad Museum of Pennsylvania Displayed with a Climax and a Shay.
1594 1929 2-truck 32 short tons
(28.6 long tons; 29.0 metric tons)
White Mountain Central Railroad 4 Clark's Trading Post in Lincoln, New Hampshire.
1401 1899 2-truck 37 short tons
(33.0 long tons; 33.6 metric tons)
Roaring Camp & Big Trees Narrow Gauge RR 2 Roaring Camp and Big Trees Narrow Gauge Railroad in Felton, California. Oldest known operational Heisler. One of several steam engines that take park guests up a steep and winding "logging-like route" thru the California Redwood forest.[3]
1306 1915 2-truck 40 short tons
(35.7 long tons; 36.3 metric tons)
W. H. Eccles Lumber Company 3 Sumpter Valley Railway in Baker County, Oregon.
1369 1918 3-truck 75 short tons
(67.0 long tons; 68.0 metric tons)
Pickering Lumber Company 2 Travel Town open-air museum in Los Angeles.
1479 1923 2-truck 55 short tons
(49.1 long tons; 49.9 metric tons)
9 Southeastern Railway Museum in Duluth, Georgia. Static display.
1351 1916 2-truck 47 short tons
(42.0 long tons; 42.6 metric tons)
Bluestone Mining & Smelting 1. Roots of Motive Power in Willits, California.
1198 1910 2-truck 60 short tons
(53.6 long tons; 54.4 metric tons)
Curtiss Lumber Company 2 Oregon Coast Scenic Railroad in Garibaldi, Oregon. Awaiting boiler work.
1930 1929 3-truck 90 short tons
(80.4 long tons; 81.6 metric tons)
West Fork Logging Co #91 Mount Rainier Scenic Railroad in Elbe, Washington. Awaiting boiler work.
3-truck 78 short tons
(69.6 long tons; 70.8 metric tons)
Mount Rainier Scenic Railroad in Elbe, Washington. Static display.
1591 1929 3-truck 90 short tons
(80.4 long tons; 81.6 metric tons)
Cass Scenic Railroad 6 Cass Scenic Railroad State Park in Cass, West Virginia. Operational.
1446 1920 2-truck 36 short tons
(32.1 long tons; 32.7 metric tons)
Pacific Lumber Co. 9 Scotia, California. Static display.
1260 1912 2-truck 36 short tons
(32.1 long tons; 32.7 metric tons)
2 Silver Creek and Stephenson historical railroad in Freeport, Illinois.
1082 1904 2-truck 20 short tons
(17.9 long tons; 18.1 metric tons)
Bush Tramway Club at Pukemiro, New Zealand. Static display.
1450 1921 2-truck 26 short tons
(23.2 long tons; 23.6 metric tons)
Ferrymead Railway, Christchurch, New Zealand. Stored in the locomotive shed.
1494 1924 2-truck 24 short tons
(21.4 long tons; 21.8 metric tons)
Shantytown, near Greymouth, New Zealand. Statically restored in 2011 for display within the park's environs.
1502 1924 3-truck 90 short tons
(80.4 long tons; 81.6 metric tons)
Potlatch 92 Locomotive Park in Lewiston, Idaho. Unrestored state on static display.
1565 1928 3-truck 80 short tons
(71.4 long tons; 72.6 metric tons)
4 El Salto, Mexico, along the Durango-Mazatlan highway.
1923 2-truck Ohio Match Company #4 Northwest Railway Museum in Snoqualmie, WA Static display. Last operated in 1958.
A & G Price 148 1943 2-truck Ogilvie and Company "Gladstone" Steam Scene, Christchurch, New Zealand, Last Heisler design locomotive built; in full working order; boiler ticket will expire in 2022.

Advantages and disadvantages[edit]

The Heisler locomotive's gearing was inside the frame and thus protected, unlike that of a Shay locomotive. However, the Heisler's drive shaft, which was located in the center of the frame, limited firebox space. For this reason, when A & G Price built their Heisler, in 1943, they used a Belpaire firebox, to mitigate problems with burning wood and accommodating the drive shaft.

References[edit]

  1. ^ Charles L. Heisler, Locomotive, U.S. Patent 482,828, Sept. 20, 1892.
  2. ^ Charles L. Heisler, Locomotive, U.S. Patent 585,031, June 22, 1897.
  3. ^ "History of". Roaring Camp Railroads. Retrieved 2020-10-26.

Further reading[edit]

  • Anonymous, The Heisler Locomotive, 1891-1941, published by Benjamin F. G. Kline, Jr., 1982. ISBN 978-1112833410

External links[edit]

Comments

Popular posts from this blog

Jacques Rancière

Electronic keyboard

Wikipedia talk:WikiProject Countries/Proposal 1