Richter magnitude scale

From Wikipedia, the free encyclopedia

  (Redirected from Richter magnitude)

Jump to navigation Jump to search

Measuring the strength ("size") of earthquakes

This article is about the original scale introduced by Charles Richter in 1935. For a review of different magnitude scales, see seismic magnitude scales.

"Richter scale" redirects here. For the musical scale used for tuning harmonicas, see Richter tuning. For the single by EPMD, see Richter Scale (song).

Part of a series on
Earthquakes
Types Foreshock Aftershock Blind thrust Doublet Interplate Intraplate Megathrust Remotely triggered Slow Submarine Supershear Tsunami Earthquake swarm
Causes Fault movement Volcanism Induced seismicity
Characteristics Epicenter Hypocenter Shadow zone Seismic waves P wave S wave
Measurement Seismometer Seismic magnitude scales Seismic intensity scales
Prediction Coordinating Committee for Earthquake Prediction Forecasting
Other topics Shear wave splitting Adams–Williamson equation Flinn–Engdahl regions Earthquake engineering Seismite Seismology
Earth Sciences Portal Category Related topics
v t e

The Richter scale^[1] – also called the Richter magnitude scale and Richter's magnitude scale – is a measure of the strength of earthquakes, developed by Charles Francis Richter and presented in his landmark 1935 paper, where he called it the "magnitude scale".^[2] This was later revised and renamed the local magnitude scale, denoted as ML or M_L .^{[citation needed]}

Because of various shortcomings of the original M_L  scale, most seismological authorities now use other similar scales, such as the moment magnitude scale (M_w ), to report earthquake magnitudes, but much of the news media still refers to these as "Richter" magnitudes. All magnitude scales retain the logarithmic character of the original and are scaled to have roughly comparable numeric values (typically in the middle of the scale).^{[citation needed]}

Contents

• 1 Development
• 2 Details
• 3 Richter magnitudes
• 4 Magnitude empirical formulae
• 5 See also
• 6 Notes
• 7 Sources
• 8 External links

Development[edit]

Charles Francis Richter (circa 1970)

Prior to the development of the magnitude scale, the only measure of an earthquake's strength or "size" was a subjective assessment of the intensity of shaking observed near the epicenter of the earthquake, categorized by various seismic intensity scales such as the Rossi-Forel scale. ("Size" is used in the sense of the quantity of energy released, not the size of the area affected by shaking, though higher-energy earthquakes do tend to affect a wider area, depending on the local geology.) In 1883 John Milne surmised that the shaking of large earthquakes might generate waves detectable around the globe, and in 1899 E. Von Rehbur Paschvitz observed in Germany seismic waves attributable to an earthquake in Tokyo.^[3] In the 1920s Harry O. Wood and John A. Anderson developed the Wood–Anderson Seismograph, one of the first practical instruments for recording seismic waves.^[4] Wood then built, under the auspices of the California Institute of Technology and the Carnegie Institute, a network of seismographs stretching across Southern California.^[5] He also recruited the young and unknown Charles Richter to measure the seismograms and locate the earthquakes generating the seismic waves.^[6]

In 1931 Kiyoo Wadati showed how he had measured, for several strong earthquakes in Japan, the amplitude of the shaking observed at various distances from the epicenter. He then plotted the logarithm of the amplitude against the distance and found a series of curves that showed a rough correlation with the estimated magnitudes of the earthquakes.^[7] Richter resolved some difficulties with this method^[8] and then, using data collected by his colleague Beno Gutenberg, he produced similar curves, confirming that they could be used to compare the relative magnitudes of different earthquakes.^[9]

To produce a practical method of assigning an absolute measure of magnitude required additional developments. First, to span the wide range of possible values, Richter adopted Gutenberg's suggestion of a logarithmic scale, where each step represents a tenfold increase of magnitude, similar to the magnitude scale used by astronomers for star brightness.^[10] Second, he wanted a magnitude of zero to be around the limit of human perceptibility.^[11] Third, he specified the Wood–Anderson seismograph as the standard instrument for producing seismograms. Magnitude was then defined as "the logarithm of the maximum trace amplitude, expressed in microns", measured at a distance of 100 km (62 mi). The scale was calibrated by defining a magnitude 0 shock as one that produces (at a distance of 100 km (62 mi)) a maximum amplitude of 1 micron (1 µm, or 0.001 millimeters) on a seismogram recorded by a Wood–Anderson torsion seismograph [pt].^[12] Finally, Richter calculated a table of distance corrections,^[13] in that for distances less than 200 kilometers^[14] the attenuation is strongly affected by the structure and properties of the regional geology.^[15]

When Richter presented the resulting scale in 1935, he called it (at the suggestion of Harry Wood) simply a "magnitude" scale.^[16] "Richter magnitude" appears to have originated when Perry Byerly told the press that the scale was Richter's and "should be referred to as such."^[17] In 1956, Gutenberg and Richter, while still referring to "magnitude scale", labelled it "local magnitude", with the symbol M_L , to distinguish it from two other scales they had developed, the surface wave magnitude (M_S) and body wave magnitude (M_B) scales.^[18]

Details[edit]

The Richter scale was defined in 1935 for particular circumstances and instruments; the particular circumstances refer to it being defined for Southern California and "implicitly incorporates the attenuative properties of Southern California crust and mantle."^[19] The particular instrument used would become saturated by strong earthquakes and unable to record high values. The scale was replaced in the 1970s by the moment magnitude scale (MMS, symbol M_w ); for earthquakes adequately measured by the Richter scale, numerical values are approximately the same. Although values measured for earthquakes now are M_w , they are frequently reported by the press as Richter values, even for earthquakes of magnitude over 8, when the Richter scale becomes meaningless.

The Richter and MMS scales measure the energy released by an earthquake; another scale, the Mercalli intensity scale, classifies earthquakes by their effects, from detectable by instruments but not noticeable, to catastrophic. The energy and effects are not necessarily strongly correlated; a shallow earthquake in a populated area with soil of certain types can be far more intense in effects than a much more energetic deep earthquake in an isolated area.

Several scales have historically been described as the "Richter scale",^{[citation needed]} especially the local magnitude M_L  and the surface wave M_s  scale. In addition, the body wave magnitude, mb , and the moment magnitude, M_w , abbreviated MMS, have been widely used for decades. A couple of new techniques to measure magnitude are in the development stage by seismologists.

All magnitude scales have been designed to give numerically similar results. This goal has been achieved well for M_L , M_s , and M_w .^[20][21] The mb  scale gives somewhat different values than the other scales. The reason for so many different ways to measure the same thing is that at different distances, for different hypocentral depths, and for different earthquake sizes, the amplitudes of different types of elastic waves must be measured.

M_L  is the scale used for the majority of earthquakes reported (tens of thousands) by local and regional seismological observatories. For large earthquakes worldwide, the moment magnitude scale (MMS) is most common, although M_s  is also reported frequently.

The seismic moment, M₀ , is proportional to the area of the rupture times the average slip that took place in the earthquake, thus it measures the physical size of the event. M_w  is derived from it empirically as a quantity without units, just a number designed to conform to the M_s  scale.^[22] A spectral analysis is required to obtain M₀ , whereas the other magnitudes are derived from a simple measurement of the amplitude of a specifically defined wave.

All scales, except M_w , saturate for large earthquakes, meaning they are based on the amplitudes of waves which have a wavelength shorter than the rupture length of the earthquakes. These short waves (high frequency waves) are too short a yardstick to measure the extent of the event. The resulting effective upper limit of measurement for M_L  is about 7 and about 8.5^[23] for M_s .^[24]

New techniques to avoid the saturation problem and to measure magnitudes rapidly for very large earthquakes are being developed. One of these is based on the long-period P-wave;^[25] the other is based on a recently discovered channel wave.^[26]

The energy release of an earthquake,^[27] which closely correlates to its destructive power, scales with the 3⁄2 power of the shaking amplitude.^[why?] Thus, a difference in magnitude of 1.0 is equivalent to a factor of 31.6 (${\displaystyle =({10^{1.0}})^{(3/2)}}$) in the energy released; a difference in magnitude of 2.0 is equivalent to a factor of 1000 (${\displaystyle =({10^{2.0}})^{(3/2)}}$) in the energy released.^[28] The elastic energy radiated is best derived from an integration of the radiated spectrum, but an estimate can be based on mb  because most energy is carried by the high frequency waves.

Richter magnitudes[edit]

The Richter magnitude of an earthquake is determined from the logarithm of the amplitude of waves recorded by seismographs (adjustments are included to compensate for the variation in the distance between the various seismographs and the epicenter of the earthquake). The original formula is:^[29]

${\displaystyle M_{\mathrm {L} }=\log _{10}A-\log _{10}A_{\mathrm {0} }(\delta )=\log _{10}[A/A_{\mathrm {0} }(\delta )],\ }$

where A is the maximum excursion of the Wood–Anderson seismograph, the empirical function A₀ depends only on the epicentral distance of the station, ${\displaystyle \delta }$. In practice, readings from all observing stations are averaged after adjustment with station-specific corrections to obtain the M_L  value.^{[citation needed]} Because of the logarithmic basis of the scale, each whole number increase in magnitude represents a tenfold increase in measured amplitude; in terms of energy, each whole number increase corresponds to an increase of about 31.6 times the amount of energy released, and each increase of 0.2 corresponds to approximately a doubling of the energy released.

Events with magnitudes greater than 4.5 are strong enough to be recorded by a seismograph anywhere in the world, so long as its sensors are not located in the earthquake's shadow.^{[citation needed]}

The following describes the typical effects of earthquakes of various magnitudes near the epicenter.^[30] The values are typical only. They should be taken with extreme caution since intensity and thus ground effects depend not only on the magnitude but also on the distance to the epicenter, the depth of the earthquake's focus beneath the epicenter, the location of the epicenter, and geological conditions (certain terrains can amplify seismic signals).^{[citation needed]}

Magnitude	Description	Mercalli intensity	Average earthquake effects	Average frequency of occurrence globally (estimated)
1.0–1.9	Micro	I	Microearthquakes, not felt, or felt rarely. Recorded by seismographs.[31]	Continual/several million per year
2.0–2.9	Minor	I to II	Felt slightly by some people. No damage to buildings.	Over one million per year
3.0–3.9		III to IV	Often felt by people, but very rarely causes damage. Shaking of indoor objects can be noticeable.	Over 100,000 per year
4.0–4.9	Light	IV to VI	Noticeable shaking of indoor objects and rattling noises. Felt by most people in the affected area. Slightly felt outside. Generally causes zero to minimal damage. Moderate to significant damage very unlikely. Some objects may fall off shelves or be knocked over.	10,000 to 15,000 per year
5.0–5.9	Moderate	VI to VII	Can cause damage of varying severity to poorly constructed buildings. Zero to slight damage to all other buildings. Felt by everyone.	1,000 to 1,500 per year
6.0–6.9	Strong	VIII to X	Damage to a moderate number of well-built structures in populated areas. Earthquake-resistant structures survive with slight to moderate damage. Poorly designed structures receive moderate to severe damage. Felt in wider areas; up to hundreds of kilometers from the epicenter. Strong to violent shaking in epicentral area.	100 to 150 per year
7.0–7.9	Major	X or greater[citation needed]	Causes damage to most buildings, some to partially or completely collapse or receive severe damage. Well-designed structures are likely to receive damage. Felt across great distances with major damage mostly limited to 250 km from epicenter.	10 to 20 per year
8.0–8.9	Great		Major damage to buildings, structures likely to be destroyed. Will cause moderate to heavy damage to sturdy or earthquake-resistant buildings. Damaging in large areas. Felt in extremely large regions.	One per year
9.0 and greater			At or near total destruction – severe damage or collapse to all buildings. Heavy damage and shaking extends to distant locations. Permanent changes in ground topography.	One per 10 to 50 years

(Based on U.S. Geological Survey documents.)^[32]

The intensity and death toll depend on several factors (earthquake depth, epicenter location, and population density, to name a few) and can vary widely.

Minor earthquakes occur every day and hour. On the other hand, great earthquakes occur once a year, on average.^{[citation needed]} The largest recorded earthquake was the Great Chilean earthquake of May 22, 1960, which had a magnitude of 9.5 on the moment magnitude scale.^[33]

Seismologist Susan Hough has suggested that a magnitude 10 quake may represent a very approximate upper limit for what the Earth's tectonic zones are capable of, which would be the result of the largest known continuous belt of faults rupturing together (along the Pacific coast of the Americas).^[34] A research at the Tohoku University in Japan found that a magnitude 10 earthquake was theoretically possible if a combined 3,000 kilometres (1,900 mi) of faults from the Japan Trench to the Kuril–Kamchatka Trench ruptured together and moved by 60 metres (200 ft) (or if a similar large-scale rupture occurred elsewhere). Such an earthquake would cause ground motions for up to an hour, with tsunamis hitting shores while the ground is still shaking, and if this kind of earthquake occurred, it would probably be a 1-in-10,000 year event.^[35]

Magnitude empirical formulae[edit]

These formulae for Richter magnitude M_L  are alternatives to using Richter correlation tables based on Richter standard seismic event (${\displaystyle M_{\mathrm {L} }=0}$, ${\displaystyle A=0.001\mathrm {mm} }$, ${\displaystyle D=100\mathrm {km} }$). Below, ${\displaystyle \textstyle \Delta }$ is the epicentral distance (in kilometers unless otherwise specified).

The Lillie empirical formula is:

${\displaystyle M_{\mathrm {L} }=\log _{10}A-2.48+2.76\log _{10}\Delta }$

where ${\displaystyle A}$ is the amplitude (maximum ground displacement) of the P-wave, in micrometers, measured at 0.8 Hz.

For distances ${\displaystyle D}$ less than 200 km,

${\displaystyle M_{\mathrm {L} }=\log _{10}A+1.6\log _{10}D-0.15}$

and for distances between 200 km and 600 km,

${\displaystyle M_{\mathrm {L} }=\log _{10}A+3.0\log _{10}D-3.38}$

where ${\displaystyle A}$ is seismograph signal amplitude in mm and ${\displaystyle D}$ is in km.

The Bisztricsany (1958) empirical formula for epicentral distances between 4˚ to 160˚ is:^[36]

${\displaystyle M_{\mathrm {L} }=2.92+2.25\log _{10}(\tau )-0.001\Delta ^{\circ }}$

where ${\displaystyle \tau }$ is the duration of the surface wave in seconds, and ${\displaystyle \Delta }$ is in degrees. M_L  is mainly between 5 and 8.

The Tsumura empirical formula is:^[36]

${\displaystyle M_{\mathrm {L} }=-2.53+2.85\log _{10}(F-P)+0.0014\Delta ^{\circ }}$

where ${\displaystyle F-P}$ is the total duration of oscillation in seconds. M_L  is mainly between 3 and 5.

The Tsuboi, University of Tokyo, empirical formula is:

${\displaystyle M_{\mathrm {L} }=\log _{10}A+1.73\log _{10}\Delta -0.83}$

where ${\displaystyle A}$ is the amplitude in micrometers.

See also[edit]

• Earth sciences portal

• 1935 in science
• Rohn Emergency Scale for measuring the magnitude (intensity) of any emergency
• Seismic intensity scales
• Seismic magnitude scales
• Timeline of United States inventions (1890–1945)

Notes[edit]

1. ^ Kanamori 1978, p. 411. Hough (2007, pp. 122–126) discusses the name at some length.
2. ^ Kanamori 1978, p. 411; Richter 1935.
3. ^ Bolt 1993, p. 47.
4. ^ Hough 2007;
5. ^ Hough 2007, p. 57.
6. ^ Hough 2007, pp. 57, 116.
7. ^ Richter 1935, p. 2.
8. ^ Richter 1935, pp. 1–5.
9. ^ Richter 1935, pp. 2–3.
10. ^ [pending]
11. ^ Richter 1935, p. 14: Gutenberg & Richter 1936, p. 183.
12. ^ Richter 1935, p. 5. See also Hutton & Boore 1987, p. 1; Chung & Bernreuter 1980, p. 10.
13. ^ Richter 1935, p. 6, Table I.
14. ^ Richter 1935, p. 32.
15. ^ Chung & Bernreuter 1980, p. 5.
16. ^ Richter 1935, p. 1. His article is titled: "An Instrumental Earthquake Magnitude Scale".
17. ^ Hough 2007, pp. 123–124.
18. ^ Gutenberg & Richter 1956b, p. 30.
19. ^ "Explanation of Bulletin Listings, USGS".
20. ^ Richter 1935.
21. ^ Richter, C.F., "Elementary Seismology", ed, Vol., W. H. Freeman and Co., San Francisco, 1956.
22. ^ Hanks, T. C.; Kanamori, H. (1979). "Moment magnitude scale". Journal of Geophysical Research. 84 (B5): 2348. Bibcode:1979JGR....84.2348H. doi:10.1029/jb084ib05p02348.
23. ^ Woo, Wang-chun (September 2012). "On Earthquake Magnitudes". Hong Kong Observatory. Retrieved December 18, 2013.
24. ^ "Richter scale". Glossary. USGS. March 31, 2010.
25. ^ Di Giacomo, D., Parolai, S., Saul, J., Grosser, H., Bormann, P., Wang, R. & Zschau, J., 2008. "Rapid determination of the energy magnitude Me," in European Seismological Commission 31st General Assembly, Hersonissos.
26. ^ Rivera, L. & Kanamori, H., 2008. "Rapid source inversion of W phase for tsunami warning," in European Geophysical Union General Assembly, pp. A-06228, Vienna.
27. ^ Vassiliou, Marius; Kanamori, Hiroo (1982). "The Energy Release in Earthquakes". Bull. Seismol. Soc. Am. 72: 371–387.
28. ^ Spence, William; Sipkin, Stuart A.; Choy, George L. (1989). "Measuring the Size of an Earthquake". Earthquakes and Volcanoes. 21 (1).
29. ^ Ellsworth, William L. (1991). "The Richter Scale ML". In Wallace, Robert E. (ed.). The San Andreas Fault System, California. USGS. p. 177. Professional Paper 1515. Retrieved September 14, 2008.
30. ^ "What is the Richter Magnitude Scale?". GNS Science. Retrieved August 3, 2021.
31. ^ This is what Richter wrote in his Elementary Seismology (1958), an opinion copiously reproduced afterwards in Earth's science primers. Recent evidence shows that earthquakes with negative magnitudes (down to −0.7) can also be felt in exceptional cases, especially when the focus is very shallow (a few hundred metres). See: Thouvenot, F.; Bouchon, M. (2008). "What is the lowest magnitude threshold at which an earthquake can be felt or heard, or objects thrown into the air?," in Fréchet, J., Meghraoui, M. & Stucchi, M. (eds), Modern Approaches in Solid Earth Sciences (vol. 2), Historical Seismology: Interdisciplinary Studies of Past and Recent Earthquakes, Springer, Dordrecht, 313–326.
32. ^ "Earthquake Facts and Statistics". United States Geological Survey. November 29, 2012. Archived from the original on May 24, 2010. Retrieved December 18, 2013.
33. ^ "Largest Earthquakes in the World Since 1900". November 30, 2012. Archived from the original on October 7, 2009. Retrieved December 18, 2013.
34. ^ Silver, Nate (2013). The signal and the noise : the art and science of prediction. London: Penguin. ISBN 9780141975658.
35. ^ Kyodo (December 15, 2012). "Magnitude 10 temblor could happen: study". The Japan Times. Retrieved September 15, 2020.
36. ^ ^{a b} Al-Arifi, Nassir S.; Al-Humidan, Saad (July 2012). "Local and regional earthquake magnitude calibration of Tabuk analog sub-network, Northwest of Saudi Arabia". Journal of King Saud University – Science. 24 (3): 257–263. doi:10.1016/j.jksus.2011.04.001.

Sources[edit]

• Bolt, B. A. (1993), Earthquakes and geological discovery, Scientific American Library, ISBN 0-7167-5040-6.

• Boore, D. M. (September 1989), "The Richter scale: its development and use for determining earthquake source parameter" (PDF), Tectonophysics, 166 (1–3): 1–14, doi:10.1016/0040-1951(89)90200-x

• Chung, D. H.; Bernreuter, D. L. (1980), Regional Relationships Among Earthquake Magnitude Scales., NUREG/CR-1457.

• Gutenberg, B.; Richter, C. F. (February 21, 1936), "Discussion: Magnitude and energy of earthquakes" (PDF), Science, 83 (2147): 183–185, Bibcode:1936Sci....83..183G, doi:10.1126/science.83.2147.183, PMID 17770563.

• Gutenberg, B.; Richter, C. F. (1956b), "Earthquake magnitude, intensity, energy, and acceleration (Second Paper)", Bulletin of the Seismological Society of America, 46 (2): 105–145.

• Hough, S. E. (2007), Richter's scale: measure of an earthquake, measure of a man, Princeton University Press, ISBN 978-0-691-12807-8.

• Hutton, L. K.; Boore, David M. (December 1987), "The M_L scale in Southern California" (PDF), Nature, 271: 411–414, Bibcode:1978Natur.271..411K, doi:10.1038/271411a0.

• Kanamori, Hiroo (February 2, 1978), "Quantification of Earthquakes" (PDF), Nature, 271 (5644): 411–414, Bibcode:1978Natur.271..411K, doi:10.1038/271411a0.

• Richter, C. F. (January 1935), "An Instrumental Earthquake Magnitude Scale" (PDF), Bulletin of the Seismological Society of America, 25 (1): 1–32.

External links[edit]

• Seismic Monitor – IRIS Consortium
• USGS Earthquake Magnitude Policy (implemented on January 18, 2002) – USGS
• Perspective: a graphical comparison of earthquake energy release – Pacific Tsunami Warning Center

v t e Seismic magnitude scales
Modern scales	Intensity scales Central Weather Bureau seismic intensity scale Environmental Seismic Intensity scale (ESI) European Macroseismic Scale (EMS) Liedu (Chinese) Medvedev–Sponheuer–Karnik (MSK) Modified Mercalli (MM) PHIVOLCS Earthquake Intensity Scale (PEIS) Shindo (Japanese) Magnitude scales Body-wave magnitude Duration magnitude Local magnitude (Richter scale) Moment magnitude Surface-wave magnitude Energy class (K-class)
Historical scales	GEOFIAN Mercalli–Cancani–Sieberg (MCS) Mercalli–Wood–Neuman (MWN) Omori Rossi–Forel

Authority control: National libraries	Germany United States Czech Republic

Retrieved from "https://en.wikipedia.org/w/index.php?title=Richter_magnitude_scale&oldid=1072346726"

Categories:

• 1935 in science
• 1935 introductions
• California Institute of Technology
• Seismic magnitude scales
• Logarithmic scales of measurement

Hidden categories:

• Articles with short description
• Short description is different from Wikidata
• Use mdy dates from February 2013
• Articles using ML magnitude scale
• All articles with unsourced statements
• Articles with unsourced statements from August 2021
• Articles using Mw magnitude scale
• Articles with unsourced statements from January 2020
• Articles using MS magnitude scale
• Articles using mb magnitude scale
• Articles using seismic moment M0
• Wikipedia articles needing clarification from August 2021
• Articles with unsourced statements from November 2018
• Articles with unsourced statements from February 2020
• Articles with GND identifiers
• Articles with LCCN identifiers
• Articles with NKC identifiers

Navigation menu

Personal tools

• Not logged in
• Talk
• Contributions
• Create account
• Log in

Namespaces

• Article
• Talk

English expanded collapsed

Views

• Read
• Edit
• View history

More expanded collapsed

Search

Navigation

• Main page
• Contents
• Current events
• Random article
• About Wikipedia
• Contact us
• Donate

Contribute

• Help
• Learn to edit
• Community portal
• Recent changes
• Upload file

Tools

• What links here
• Related changes
• Upload file
• Special pages
• Permanent link
• Page information
• Cite this page
• Wikidata item

Print/export

• Download as PDF
• Printable version

Languages

• Afrikaans
• العربية
• Asturianu
• Azərbaycanca
• تۆرکجه
• বাংলা
• Bân-lâm-gú
• Беларуская
• भोजपुरी
• Български
• Bosanski
• Brezhoneg
• Català
• Čeština
• Corsu
• Cymraeg
• Dansk
• Deutsch
• Eesti
• Ελληνικά
• Español
• Esperanto
• Euskara
• فارسی
• Føroyskt
• Français
• Frysk
• Furlan
• Gaeilge
• Galego
• ગુજરાતી
• 한국어
• Հայերեն
• हिन्दी
• Hrvatski
• Ido
• Bahasa Indonesia
• Italiano
• עברית
• Jawa
• ಕನ್ನಡ
• ქართული
• Kreyòl ayisyen
• Latina
• Latviešu
• Limburgs
• Magyar
• Македонски
• മലയാളം
• मराठी
• მარგალური
• مصرى
• Bahasa Melayu
• Монгол
• Nederlands
• 日本語
• Norsk bokmål
• Norsk nynorsk
• Occitan
• ଓଡ଼ିଆ
• Oʻzbekcha/ўзбекча
• ਪੰਜਾਬੀ
• Piemontèis
• Polski
• Português
• Română
• Русский
• Shqip
• Sicilianu
• Simple English
• Slovenčina
• Slovenščina
• Soomaaliga
• Српски / srpski
• Srpskohrvatski / српскохрватски
• Suomi
• Svenska
• Tagalog
• தமிழ்
• ไทย
• Тоҷикӣ
• Türkçe
• Українська
• اردو
• Vèneto
• Tiếng Việt
• Walon
• West-Vlams
• Winaray
• 吴语
• ייִדיש
• 粵語
• 中文

Edit links

• This page was last edited on 17 February 2022, at 06:44 (UTC).
• Text is available under the Creative Commons Attribution-ShareAlike License 3.0; additional terms may apply. By using this site, you agree to the Terms of Use and Privacy Policy. Wikipedia® is a registered trademark of the Wikimedia Foundation, Inc., a non-profit organization.

• Privacy policy
• About Wikipedia
• Disclaimers
• Contact Wikipedia
• Mobile view
• Developers
• Statistics
• Cookie statement

• 
•